(Cross)Compiling software for Raspbian in a chroot environment.

By using the Raspbian distro on the Raspberry PI (or any debian / main stream distro for that matter on any embedded device), most of the software packages that you would want to install are available within the package manager of the distribution. Sometimes there some small / medium sized programs missing, or you want
Tagged under: , , , , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Installing HASS) – PART 8

On to installing Home Assistant on our device. Like with the KODI installation, this is mostly information widely available on the internet, yet again included within this series for compleness sake. So let’s get started with installing the dependencies if not yet installed. (Not really sure anymore, sorry for this) Next we need to create
Tagged under: , , , , , , ,

[DiY] Home (Personal AI) Assistant (Installing KODI) – PART 7

Next on the list is to install KODI on our device. This of course is optional, but as my device will end up close to the TV within the livingroom and I would like to have a great mediaplayer that plays all my offline content as well as a lot of online content (the upcoming
Tagged under: , , , , , ,

[DiY] Home (Personal AI) Assistant (Intermediate Roadmap) – PART 6

As mentioned in my previous blog post, this next blog post is about where we are at and what lies ahead. There are still so much things that I would like to do, create and / or implement at the Home Personal A.I. Assistant project. The next two items where already on the list and
Tagged under: , , , , , , , ,

Orbital Case – Titanium White is in!

In one of the previous blog post I wrote about my plan to contact the people of Orbital Case – Polypodis Shop about the possibilities of having the case ordered straight from them and have it delivered to The Netherlands. Well during the website overhaul I did and their response was suprisingly, well…. Great! They
Tagged under: , , ,

Orbital Case – Some modding ideas

As already mentioned in the “ordering some goodies” blog post, the nice case I want to use as housing for our [DIY] HOME (PERSONAL AI) ASSISTANT project is the Orbital case from Polypodis – Germany. Now I have not yet ordered one as of yet as I still need to contact them about shipment possibilities
Tagged under: , , , ,

[DiY] Home (Personal AI) Assistant (Preparing the HDMI) – PART 5

Our Personal AI Assistant, of course is more then just a smart speaker. We have a HDMI port on the device, and as explained in my first post where I shared with you my vision about the Personal Assistant. We are going to use the HDMI port as well. A default install of Raspbian however
Tagged under: , , , , , , , , , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Installing & Configuration) – PART 4

We have identified all the software requirements and we have ordered the goodies. Now it is time to start installing the different components and start the configuration of all different packages. After following this installation instruction we should have a basic system up and running with the latest MyCroft version using the ReSpeaker microphone array
Tagged under: , , , , , , , , , , , , , ,

[DiY] Home (Personal AI) Assistant (The software stack) – PART 3

With the base system hardware decision out of the way, we need to decide which software we are going to use. In this blog post we are going to talk about which underlying OS we are going to use. Which Home Automation software package to use and for the “Heart” of the whole system, which
Tagged under: , , , , , , , , , , ,