[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 3

October went by (time flies when you are having fun!), hence the first week of November is also already gone so it is about time to update you all about the progress on MycroftOS. In my last update I mentioned that the git commit history was a complete mess. Last month I took the time,
Tagged under: , , , , , , , ,

[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 2

In my previous first blog post about the MycroftOS project, I informed you all about the start of the project. Now I did mention in that blog post that it was most likely a bit premature to already blog about it. However in the last few weeks I have been able to work on the
Tagged under: , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Some more ideas) – PART 9

Some Mycroft A.I. Ideas I developed over time It has been a while now since I came into contact with Mycroft A.I. Till then I have been playing around with it and started the blog post about how to create your own Personal A.I. Assistant blog series. I will shortly continue with that blog series,
Tagged under: , , , , , , , ,

[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 1

This is a very early post (probably way to soon anyway, but…) in the [DEV] MycroftOS project blog series. MycroftOS is a bare minimal OS based on Buildroot which has only one purpose which is running Mycroft without any further additional packages and / or overhead. At the end of the project, it could be
Tagged under: , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Intermediate Roadmap) – PART 6

As mentioned in my previous blog post, this next blog post is about where we are at and what lies ahead. There are still so much things that I would like to do, create and / or implement at the Home Personal A.I. Assistant project. The next two items where already on the list and
Tagged under: , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Preparing the HDMI) – PART 5

Our Personal AI Assistant, of course is more then just a smart speaker. We have a HDMI port on the device, and as explained in my first post where I shared with you my vision about the Personal Assistant. We are going to use the HDMI port as well. A default install of Raspbian however
Tagged under: , , , , , , , , , , , , , , , ,

[DiY] Home (Personal AI) Assistant (Installing & Configuration) – PART 4

We have identified all the software requirements and we have ordered the goodies. Now it is time to start installing the different components and start the configuration of all different packages. After following this installation instruction we should have a basic system up and running with the latest MyCroft version using the ReSpeaker microphone array
Tagged under: , , , , , , , , , , , , , ,

MyCroft A.I. – The Software Stack

The MyCroft AI core stack consists of multiple software packages that are connected by the core stack. For example, every part of the voice assistant is handled by his own piece of “expertise”. In this blogpost will will give an better explanation of those different parts of this core stack. Under the hood Precise –
Tagged under: , , , , , , , , , ,

MyCroft AI – Open Source Voice Assistant

MyCroft AI – The world’s first open source voice assistant was created and launched by a startup with the same name. The company MyCroft was set up in 2015 with the aim; “AI for everyone” open source installable on every piece of hardware from computers, to refrigerators, wearables, TVs, cars and so on. What is
Tagged under: , , , , , , , , ,