[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 3

October went by (time flies when you are having fun!), hence the first week of November is also already gone so it is about time to update you all about the progress on MycroftOS. In my last update I mentioned that the git commit history was a complete mess. Last month I took the time,
Tagged under: , , , , , , , ,

[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 2

In my previous first blog post about the MycroftOS project, I informed you all about the start of the project. Now I did mention in that blog post that it was most likely a bit premature to already blog about it. However in the last few weeks I have been able to work on the
Tagged under: , , , , , , , ,

[DEV] MycroftOS – A bare minimal OS based on Buildroot – PART 1

This is a very early post (probably way to soon anyway, but…) in the [DEV] MycroftOS project blog series. MycroftOS is a bare minimal OS based on Buildroot which has only one purpose which is running Mycroft without any further additional packages and / or overhead. At the end of the project, it could be
Tagged under: , , , , , , , ,

Compiling WPE Webkit for the RaspberryPi

Recently I became aware of a very nice project that makes it possible to run a complete fullscreen borderless hardware accelerated webbrowser on the Raspberry Pi. As you might have read in one of the blog posts in the [DiY] Personal A.I. Assistant series, I would like to run it on the device and making
Tagged under: , , , , , , , ,

(Cross)Compiling software for Raspbian in a chroot environment.

By using the Raspbian distro on the Raspberry PI (or any debian / main stream distro for that matter on any embedded device), most of the software packages that you would want to install are available within the package manager of the distribution. Sometimes there some small / medium sized programs missing, or you want
Tagged under: , , , , , , , , , , ,

Ordering some Goodies

As discussed in Part-2 of the [DIY] Home (Personal AI) Assistant blog post series we decided we needed some hardware to buy. Basically a Raspberry Pi, ReSpeaker 4-Mic Array and a nive looking case. Well, that’s what I did! Here is what I specifically ordered, where and a quick glance at all the parts. I
Tagged under: , , , , ,

Initramfs support for Linux-ARM (Allwinner A10)

If you use any of the ubuntu based distributions out there you might want to make use of  Initramfs support for the Allwinner A10. Using a initramfs solves a lot of errors related to boot profilers such as ureadahead. Secondly you are able to load kernel modules soon in the boot process, hence the reason
Tagged under: , ,